[[TOC]] = Information about the batch system (SLURM) = {{{#!comment outdated ?! For the old torque documentation, please see [wiki:"Public/User_Guide/Batch_system_torque" the old documentation]. }}} Please confer /etc/slurm/README. The documentation of Slurm can be found [https://slurm.schedmd.com/ here]. == Overview == Slurm offers interactive and batch jobs (scripts submitted into the system). The relevant commands are `srun` and `sbatch`. The `srun` command can be used to spawn processes ('''please do not use mpiexec'''), both from the frontend and from within a batch script. You can also get a shell on a node to work locally there (e.g. to compile your application natively for a special platform). == Available Partitions == Please note that there is no default partition configured. In order to run a job, you have to specify one of the following partitions, using the {{{--partition=...}}} switch: || '''Name''' || '''Description''' || || dp-cn || dp-cn[01-50], DEEP-EST Cluster nodes (Xeon Skylake) || || dp-dam || dp-dam[01-16], DEEP-EST Dam nodes (Xeon Cascadelake + 1 V100 + 1 Stratix 10) || || dp-dam-ext || dp-dam[09-16], DEEP-EST Dam nodes connected with Extoll Tourmalet || || dp-esb || dp-esb[01-25], DEEP-EST Esb nodes (Xeon Cascadelake + 1 V100) || || dp-sdv-esb || dp-sdv-esb[01-02], DEEP-EST ESB Test nodes (Xeon Cascadelake + 1 V100) || || ml-gpu || ml-gpu[01-03], GPU test nodes for ML applications (up to 4 V100 cards) || || sdv || deeper-sdv[01-16], cluster test nodes with Xeon Haswell CPU || || extoll || deeper-sdv[01-16] (these nodes use an Extoll Tourmalet fabric) || || knl || knl[01,04-06], KNL nodes || || knl256 || knl[01,05], KNL nodes with 64 cores || || knl272 || knl[04,06], KNL nodes with 68 cores || || snc4 || knl[05], KNL node in snc4 memory mode || || psgw-cluster || gateway test node || || psgw-booster || gateway test node || || debug || all compute nodes (no gateways) || Anytime, you can list the state of the partitions with the {{{sinfo}}} command. The properties of a partition can be seen using {{{ scontrol show partition }}} == Remark about environment == By default, Slurm passes the environment from your job submission session directly to the execution environment. Please be aware of this when running jobs with `srun` or when submitting scripts with `sbatch`. This behavior can be controlled via the `--export` option. Please refer to the [https://slurm.schedmd.com/ Slurm documentation] to get more information about this. In particular, when submitting job scripts, it is recommended to load the necessary modules within the script and submit the script from a clean environment. == An introductory example == Suppose you have an mpi executable named {{{hello_mpi}}}. There are three ways to start the binary. === From a shell on a node === First, start a shell on a node. You would like to run your mpi task on 4 machines with 2 tasks per machine: {{{ [kreutz1@deepv /p/project/cdeep/kreutz1/Temp]$ srun -A deep -p dp-cn -N 4 -n 8 -t 00:30:00 --pty /bin/bash -i [kreutz1@dp-cn01 /p/project/cdeep/kreutz1/Temp]$ }}} The environment is transported to the remote shell, no {{{.profile}}}, {{{.bashrc}}}, ... are sourced (especially not the modules default from {{{/etc/profile.d/modules.sh}}}). As of March 2020, an account has to be specified using the `--account` (short `-A`) option, which is "deep" for the project members. For people not included in the DEEP-EST project, please use the "Budget" name you received along with your account creation. Once you get to the compute node, start your application using {{{srun}}}. Note that the number of tasks used is the same as specified in the initial {{{srun}}} command above (4 nodes with two tasks each): {{{ [kreutz1@deepv Temp]$ srun -A deep -p dp-cn -N 4 -n 8 -t 00:30:00 --pty /bin/bash -i [kreutz1@dp-cn01 Temp]$ srun ./MPI_HelloWorld Hello World from rank 3 of 8 on dp-cn02 Hello World from rank 7 of 8 on dp-cn04 Hello World from rank 2 of 8 on dp-cn02 Hello World from rank 6 of 8 on dp-cn04 Hello World from rank 0 of 8 on dp-cn01 Hello World from rank 4 of 8 on dp-cn03 Hello World from rank 1 of 8 on dp-cn01 Hello World from rank 5 of 8 on dp-cn03 }}} You can ignore potential warnings about the cpu binding. !ParaStation will pin your processes. === Running directly from the front ends === You can run the application directly from the frontend, bypassing the shell: {{{ [kreutz1@deepv Temp]$ srun -A deep -p dp-cn -N 4 -n 8 -t 00:30:00 ./MPI_HelloWorld Hello World from rank 7 of 8 on dp-cn04 Hello World from rank 3 of 8 on dp-cn02 Hello World from rank 6 of 8 on dp-cn04 Hello World from rank 2 of 8 on dp-cn02 Hello World from rank 4 of 8 on dp-cn03 Hello World from rank 0 of 8 on dp-cn01 Hello World from rank 1 of 8 on dp-cn01 Hello World from rank 5 of 8 on dp-cn03 }}} In this case, it can be useful to create an allocation which you can use for several runs of your job: {{{ [kreutz1@deepv Temp]$ salloc -A deep -p dp-cn -N 4 -n 8 -t 00:30:00 salloc: Granted job allocation 69263 [kreutz1@deepv Temp]$ srun ./MPI_HelloWorld Hello World from rank 7 of 8 on dp-cn04 Hello World from rank 3 of 8 on dp-cn02 Hello World from rank 6 of 8 on dp-cn04 Hello World from rank 2 of 8 on dp-cn02 Hello World from rank 5 of 8 on dp-cn03 Hello World from rank 1 of 8 on dp-cn01 Hello World from rank 4 of 8 on dp-cn03 Hello World from rank 0 of 8 on dp-cn01 ... # several more runs ... [kreutz1@deepv Temp]$ exit exit salloc: Relinquishing job allocation 69263 }}} === Batch script === Given the following script {{{hello_cluster.sh}}}: {{{ #!/bin/bash #SBATCH --partition=dp-cn #SBATCH -A deep #SBATCH -N 4 #SBATCH -n 8 #SBATCH -o /p/project/cdeep/kreutz1/hello_cluster-%j.out #SBATCH -e /p/project/cdeep/kreutz1/hello_cluster-%j.err #SBATCH --time=00:10:00 srun ./MPI_HelloWorld }}} This script requests 4 nodes with 8 tasks, specifies the stdout and stderr files, and asks for 10 minutes of walltime. Submit: {{{ [kreutz1@deepv Temp]$ sbatch hello_cluster.sh Submitted batch job 69264 }}} Check what it's doing: {{{ [kreutz1@deepv Temp]$ squeue -u $USER JOBID PARTITION NAME USER ST TIME NODES NODELIST(REASON) 69264 dp-cn hello_cl kreutz1 CG 0:04 4 dp-cn[01-04] }}} Check the result: {{{ [kreutz1@deepv Temp]$ cat /p/project/cdeep/kreutz1/hello_cluster-69264.out Hello World from rank 6 of 8 on dp-cn04 Hello World from rank 3 of 8 on dp-cn02 Hello World from rank 0 of 8 on dp-cn01 Hello World from rank 4 of 8 on dp-cn03 Hello World from rank 2 of 8 on dp-cn02 Hello World from rank 7 of 8 on dp-cn04 Hello World from rank 5 of 8 on dp-cn03 Hello World from rank 1 of 8 on dp-cn01 }}} == Heterogeneous jobs == As of version 17.11 of Slurm, heterogeneous jobs are supported. For example, the user can run: {{{ srun --account=deep --partition=dp-cn -N 1 -n 1 hostname : --partition=dp-dam -N 1 -n 1 hostname dp-cn01 dp-dam01 }}} Please notice the `:` separating the definitions for each sub-job of the heterogeneous job. Also, please be aware that it is possible to have more than two sub-jobs in a heterogeneous job. The user can also request several sets of nodes in a heterogeneous allocation using `salloc`. For example: {{{ salloc --partition=dp-cn -N 2 : --partition=dp-dam -N 4 }}} In order to submit a heterogeneous job via `sbatch`, the user needs to set the batch script similar to the following one: {{{#!sh #!/bin/bash #SBATCH --job-name=imb_execute_1 #SBATCH --account=deep #SBATCH --mail-user= #SBATCH --mail-type=ALL #SBATCH --output=job.out #SBATCH --error=job.err #SBATCH --time=00:02:00 #SBATCH --partition=dp-cn #SBATCH --nodes=1 #SBATCH --ntasks=12 #SBATCH --ntasks-per-node=12 #SBATCH --cpus-per-task=1 #SBATCH packjob #SBATCH --partition=dp-dam #SBATCH --constraint= #SBATCH --nodes=1 #SBATCH --ntasks=12 #SBATCH --ntasks-per-node=12 #SBATCH --cpus-per-task=1 srun ./app_cn : ./app_dam }}} Here the `packjob` keyword allows to define Slurm parameters for each sub-job of the heterogeneous job. Some Slurm options can be defined once at the beginning of the script and are automatically propagated to all sub-jobs of the heterogeneous job, while some others (i.e. `--nodes` or `--ntasks`) must be defined for each sub-job. You can find a list of the propagated options on the [https://slurm.schedmd.com/heterogeneous_jobs.html#submitting Slurm documentation]. When submitting a heterogeneous job with this colon notation using ParaStationMPI, a unique `MPI_COMM_WORLD` is created, spanning across the two partitions. If this is not desired, one can use the `--pack-group` key to submit independent job steps to the different node-groups of a heterogeneous allocation: {{{#!sh srun --pack-group=0 ./app_cn ; srun --pack-group=1 ./app_dam }}} Using this configuration implies that inter-communication must be established manually by the applications during run time, if needed. For more information about heterogeneous jobs please refer to the [https://slurm.schedmd.com/heterogeneous_jobs.html relevant page] of the Slurm documentation. === Heterogeneous jobs with MPI communication across modules === In order to establish MPI communication across modules using different interconnect technologies, some special Gateway nodes must be used. On the DEEP-EST system, MPI communication across gateways is needed only between Infiniband and Extoll interconnects. **Attention:** Only !ParaStation MPI supports MPI communication across gateway nodes. This is an example job script for setting up an Intel MPI benchmark between a Cluster and a DAM node using a IB <-> Extoll gateway for MPI communication: {{{ #!/bin/bash # Script to launch IMB PingPong between DAM-CN using 1 Gateway # Use the gateway allocation provided by SLURM # Use the packjob feature to launch separately CM and DAM executable # General configuration of the job #SBATCH --job-name=modular-imb #SBATCH --account=deep #SBATCH --time=00:10:00 #SBATCH --output=modular-imb-%j.out #SBATCH --error=modular-imb-%j.err # Configure the gateway daemon #SBATCH --gw_num=1 #SBATCH --gw_psgwd_per_node=1 # Configure node and process count on the CM #SBATCH --partition=dp-cn #SBATCH --nodes=1 #SBATCH --ntasks-per-node=1 #SBATCH packjob # Configure node and process count on the DAM #SBATCH --partition=dp-dam-ext #SBATCH --nodes=1 #SBATCH --ntasks-per-node=1 # Echo job configuration echo "DEBUG: SLURM_JOB_NODELIST=$SLURM_JOB_NODELIST" echo "DEBUG: SLURM_NNODES=$SLURM_NNODES" echo "DEBUG: SLURM_TASKS_PER_NODE=$SLURM_TASKS_PER_NODE" # Set the environment to use PS-MPI module --force purge module use $OTHERSTAGES module load Stages/Devel-2019a module load Intel module load ParaStationMPI # Show the hosts we are running on srun hostname : hostname # Execute APP="./IMB-MPI1 Uniband" srun ${APP} : ${APP} }}} **Attention:** During the first part of 2020, only the DAM nodes will have Extoll interconnect, while the CM and the ESB nodes will be connected via Infiniband. This will change later during the course of the project (expected Summer 2020), when the ESB will be equipped with Extoll connectivity (Infiniband will be removed from the ESB and left only for the CM). A general description of how the user can request and use gateway nodes is provided at [https://apps.fz-juelich.de/jsc/hps/jureca/modular-jobs.html#mpi-traffic-across-modules this section] of the JURECA documentation. **Attention:** some information provided on the JURECA documentation do not apply for the DEEP system. In particular: * as of 31/03/2020, the DEEP system has 2 gateway nodes. * As of 09/01/2020 the gateway nodes are exclusive to the job requesting them. Given the limited number of gateway nodes available on the system, this may change in the future. * The `xenv` utility (necessary on JURECA to load modules for different architectures - Haswell and KNL) is needed on DEEP only to load the `extoll` module on the DAM and ESB nodes (the `extoll` module is not available on the CM. Trying to load it there will produce an error and cause the job to fail). All the other modules can be loaded via the usual `module load` or `ml` command on the batch script before the `srun` command. If desired, `xenv` can still be used to load different set of modules for different sub-jobs of a heterogeneous jobs. {{{#!comment If you need to load modules before launching the application, it's suggested to create wrapper scripts around the applications, and submit such scripts with srun, like this: {{{#!sh ... srun ./script_sdv.sh : ./script_knl.sh }}} where a script should contain: {{{#!sh #!/bin/bash module load ... ./app_sdv }}} This way it will also be possible to load different modules on the different partitions used in the heterogeneous job. }}} == Information on past jobs and accounting == The `sacct` command can be used to enquire the Slurm database about a past job. {{{ [kreutz1@deepv Temp]$ sacct -j 69268 JobID JobName Partition Account AllocCPUS State ExitCode ------------ ---------- ---------- ---------- ---------- ---------- -------- 69268+0 bash dp-cn deepest-a+ 96 COMPLETED 0:0 69268+0.0 MPI_Hello+ deepest-a+ 2 COMPLETED 0:0 69268+1 bash dp-dam deepest-a+ 384 COMPLETED 0:0 }}} On the Cluster (CM) nodes it's possible to query the consumed energy for a certain job: {{{ [kreutz1@deepv kreutz1]$ sacct -o ConsumedEnergy,JobName,JobID,CPUTime,AllocNodes -j 69326 ConsumedEnergy JobName JobID CPUTime AllocNodes -------------- ---------- ------------ ---------- ---------- 496.70K hpl_MKL_O+ 69326 16:28:48 1 0 batch 69326.batch 16:28:48 1 496.70K xlinpack_+ 69326.0 08:10:24 1 }}} This feature will also be for the ESB nodes. == FAQ == === Is there a cheat sheet for all main Slurm commands? === Yes, it is available [https://slurm.schedmd.com/pdfs/summary.pdf here]. === Why's my job not running? === You can check the state of your job with {{{ scontrol show job }}} In the output, look for the {{{Reason}}} field. You can check the existing reservations using {{{ scontrol show res }}} === How can I check which jobs are running in the machine? === Please use the {{{squeue}}} command ( the "-u $USER" option to only list jobs belonging to your user id). === How do I do chain jobs with dependencies? === Please confer the {{{sbatch}}}/{{{srun}}} man page, especially the {{{ -d, --dependency= }}} entry. Also, jobs can be chained after they have been submitted using the `scontrol` command by updating their `Dependency` field. === How can check the status of partitions and nodes? === The main command to use is `sinfo`. By default, when called alone, `sinfo` will list the available partitions and the number of nodes in each partition in a given status. For example: {{{ [deamicis1@deepv hybridhello]$ sinfo PARTITION AVAIL TIMELIMIT NODES STATE NODELIST sdv up 20:00:00 11 idle deeper-sdv[06-16] knl up 20:00:00 1 drain knl01 knl up 20:00:00 3 idle knl[04-06] knl256 up 20:00:00 1 drain knl01 knl256 up 20:00:00 1 idle knl05 knl272 up 20:00:00 2 idle knl[04,06] snc4 up 20:00:00 1 idle knl05 extoll up 20:00:00 11 idle deeper-sdv[06-16] ml-gpu up 20:00:00 3 idle ml-gpu[01-03] dp-cn up 20:00:00 1 drain dp-cn33 dp-cn up 20:00:00 5 resv dp-cn[09-10,25,49-50] dp-cn up 20:00:00 44 idle dp-cn[01-08,11-24,26-32,34-48] dp-dam up 20:00:00 1 drain* dp-dam08 dp-dam up 20:00:00 2 drain dp-dam[03,07] dp-dam up 20:00:00 3 resv dp-dam[05,09-10] dp-dam up 20:00:00 2 alloc dp-dam[01,04] dp-dam up 20:00:00 8 idle dp-dam[02,06,11-16] dp-dam-ext up 20:00:00 2 resv dp-dam[09-10] dp-dam-ext up 20:00:00 6 idle dp-dam[11-16] dp-esb up 20:00:00 51 drain* dp-esb[11,26-75] dp-esb up 20:00:00 2 drain dp-esb[08,23] dp-esb up 20:00:00 2 alloc dp-esb[09-10] dp-esb up 20:00:00 20 idle dp-esb[01-07,12-22,24-25] dp-sdv-esb up 20:00:00 2 resv dp-sdv-esb[01-02] psgw-cluster up 20:00:00 1 idle nfgw01 psgw-booster up 20:00:00 1 idle nfgw02 debug up 20:00:00 1 drain* dp-dam08 debug up 20:00:00 4 drain dp-cn33,dp-dam[03,07],knl01 debug up 20:00:00 10 resv dp-cn[09-10,25,49-50],dp-dam[05,09-10],dp-sdv-esb[01-02] debug up 20:00:00 2 alloc dp-dam[01,04] debug up 20:00:00 69 idle deeper-sdv[06-16],dp-cn[01-08,11-24,26-32,34-48],dp-dam[02,06,11-16],knl[04-06],ml-gpu[01-03] }}} Please refer to the man page for `sinfo` for more information. === Can I join stderr and stdout like it was done with {{{-joe}}} in Torque? === Not directly. In your batch script, redirect stdout and stderr to the same file: {{{#!sh ... #SBATCH -o /point/to/the/common/logfile-%j.log #SBATCH -e /point/to/the/common/logfile-%j.log ... }}} (The {{{%j}}} will place the job id in the output file). N.B. It might be more efficient to redirect the output of your script's commands to a dedicated file. === What is the default binding/pinning behaviour on DEEP? === DEEP uses a !ParTec-modified version of Slurm called psslurm. In psslurm, the options concerning binding and pinning are different from the ones provided in Vanilla Slurm. By default, psslurm will use a ''by rank'' pinning strategy, assigning each Slurm task to a different physical thread on the node starting from OS processor 0. For example: {{{#!sh [deamicis1@deepv hybridhello]$ OMP_NUM_THREADS=1 srun -N 1 -n 4 -p dp-cn ./HybridHello | sort -k9n -k11n Hello from node dp-cn50, core 0; AKA rank 0, thread 0 Hello from node dp-cn50, core 1; AKA rank 1, thread 0 Hello from node dp-cn50, core 2; AKA rank 2, thread 0 Hello from node dp-cn50, core 3; AKA rank 3, thread 0 }}} **Attention:** please be aware that the psslurm affinity settings only affect the tasks spawned by Slurm. When using threaded applications, the thread affinity will be inherited from the task affinity of the process originally spawned by Slurm. For example, for a hybrid MPI-OpenMP application: {{{#!sh [deamicis1@deepv hybridhello]$ OMP_NUM_THREADS=4 srun -N 1 -n 4 -c 4 -p dp-dam ./HybridHello | sort -k9n -k11n Hello from node dp-dam01, core 0-3; AKA rank 0, thread 0 Hello from node dp-dam01, core 0-3; AKA rank 0, thread 1 Hello from node dp-dam01, core 0-3; AKA rank 0, thread 2 Hello from node dp-dam01, core 0-3; AKA rank 0, thread 3 Hello from node dp-dam01, core 4-7; AKA rank 1, thread 0 Hello from node dp-dam01, core 4-7; AKA rank 1, thread 1 Hello from node dp-dam01, core 4-7; AKA rank 1, thread 2 Hello from node dp-dam01, core 4-7; AKA rank 1, thread 3 Hello from node dp-dam01, core 8-11; AKA rank 2, thread 0 Hello from node dp-dam01, core 8-11; AKA rank 2, thread 1 Hello from node dp-dam01, core 8-11; AKA rank 2, thread 2 Hello from node dp-dam01, core 8-11; AKA rank 2, thread 3 Hello from node dp-dam01, core 12-15; AKA rank 3, thread 0 Hello from node dp-dam01, core 12-15; AKA rank 3, thread 1 Hello from node dp-dam01, core 12-15; AKA rank 3, thread 2 Hello from node dp-dam01, core 12-15; AKA rank 3, thread 3 }}} Be sure to explicitly set the thread affinity settings in your script (e.g. exporting environment variables) or directly in your code. Taking the previous example: {{{#!sh [deamicis1@deepv hybridhello]$ OMP_NUM_THREADS=4 OMP_PROC_BIND=close srun -N 1 -n 4 -c 4 -p dp-dam ./HybridHello | sort -k9n -k11n Hello from node dp-dam01, core 0; AKA rank 0, thread 0 Hello from node dp-dam01, core 1; AKA rank 0, thread 1 Hello from node dp-dam01, core 2; AKA rank 0, thread 2 Hello from node dp-dam01, core 3; AKA rank 0, thread 3 Hello from node dp-dam01, core 4; AKA rank 1, thread 0 Hello from node dp-dam01, core 5; AKA rank 1, thread 1 Hello from node dp-dam01, core 6; AKA rank 1, thread 2 Hello from node dp-dam01, core 7; AKA rank 1, thread 3 Hello from node dp-dam01, core 8; AKA rank 2, thread 0 Hello from node dp-dam01, core 9; AKA rank 2, thread 1 Hello from node dp-dam01, core 10; AKA rank 2, thread 2 Hello from node dp-dam01, core 11; AKA rank 2, thread 3 Hello from node dp-dam01, core 12; AKA rank 3, thread 0 Hello from node dp-dam01, core 13; AKA rank 3, thread 1 Hello from node dp-dam01, core 14; AKA rank 3, thread 2 Hello from node dp-dam01, core 15; AKA rank 3, thread 3 }}} Please refer to the [https://apps.fz-juelich.de/jsc/hps/jureca/affinity.html following page] on the JURECA documentation for more information about how to affect affinity on the DEEP system using psslurm options. Please be aware that different partitions on DEEP have different number of sockets per node and cores/threads per socket with respect to JURECA. Please refer to the [wiki:System_overview] or run the `lstopo-no-graphics` on the compute nodes to get more information about the hardware configuration on the different modules. === How do I use SMT on the DEEP CPUs? === On DEEP, SMT is enabled by default on all nodes. Please be aware that on all JSC systems (including DEEP), each hardware thread is exposed by the OS as a separate CPU. For a ''n''-core node, with ''m'' hardware threads per core, the OS cores from ''0'' to ''n-1'' will correspond to the first hardware thread of all hardware cores (from all sockets), the OS cores from ''n'' to ''2n-1'' to the second hardware thread of the hardware cores, and so on. For instance, on a Cluster node (with two sockets with 12 cores each, with 2 hardware threads per core): {{{ [deamicis1@deepv hybridhello]$ srun -N 1 -n 1 -p dp-cn lstopo-no-graphics --no-caches --no-io --no-bridges --of ascii ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Machine (191GB total) │ │ │ │ ┌────────────────────────────────────────────────────────────────────────┐ ┌────────────────────────────────────────────────────────────────────────┐ │ │ │ ┌────────────────────────────────────────────────────────────────────┐ │ │ ┌────────────────────────────────────────────────────────────────────┐ │ │ │ │ │ NUMANode P#0 (95GB) │ │ │ │ NUMANode P#1 (96GB) │ │ │ │ │ └────────────────────────────────────────────────────────────────────┘ │ │ └────────────────────────────────────────────────────────────────────┘ │ │ │ │ │ │ │ │ │ │ ┌────────────────────────────────────────────────────────────────────┐ │ │ ┌────────────────────────────────────────────────────────────────────┐ │ │ │ │ │ Package P#0 │ │ │ │ Package P#1 │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ ┌─────────────┐ ┌─────────────┐ ┌─────────────┐ ┌─────────────┐ │ │ │ │ ┌─────────────┐ ┌─────────────┐ ┌─────────────┐ ┌─────────────┐ │ │ │ │ │ │ │ Core P#0 │ │ Core P#1 │ │ Core P#2 │ │ Core P#3 │ │ │ │ │ │ Core P#0 │ │ Core P#3 │ │ Core P#4 │ │ Core P#8 │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ ┌─────────┐ │ │ ┌─────────┐ │ │ ┌─────────┐ │ │ ┌─────────┐ │ │ │ │ │ │ ┌─────────┐ │ │ ┌─────────┐ │ │ ┌─────────┐ │ │ ┌─────────┐ │ │ │ │ │ │ │ │ │ PU P#0 │ │ │ │ PU P#1 │ │ │ │ PU P#2 │ │ │ │ PU P#3 │ │ │ │ │ │ │ │ PU P#12 │ │ │ │ PU P#13 │ │ │ │ PU P#14 │ │ │ │ PU P#15 │ │ │ │ │ │ │ │ │ └─────────┘ │ │ └─────────┘ │ │ └─────────┘ │ │ └─────────┘ │ │ │ │ │ │ └─────────┘ │ │ └─────────┘ │ │ └─────────┘ │ │ └─────────┘ │ │ │ │ │ │ │ │ ┌─────────┐ │ │ ┌─────────┐ │ │ ┌─────────┐ │ │ ┌─────────┐ │ │ │ │ │ │ ┌─────────┐ │ │ ┌─────────┐ │ │ ┌─────────┐ │ │ ┌─────────┐ │ │ │ │ │ │ │ │ │ PU P#24 │ │ │ │ PU P#25 │ │ │ │ PU P#26 │ │ │ │ PU P#27 │ │ │ │ │ │ │ │ PU P#36 │ │ │ │ PU P#37 │ │ │ │ PU P#38 │ │ │ │ PU P#39 │ │ │ │ │ │ │ │ │ └─────────┘ │ │ └─────────┘ │ │ └─────────┘ │ │ └─────────┘ │ │ │ │ │ │ └─────────┘ │ │ └─────────┘ │ │ └─────────┘ │ │ └─────────┘ │ │ │ │ │ │ │ └─────────────┘ └─────────────┘ └─────────────┘ └─────────────┘ │ │ │ │ └─────────────┘ └─────────────┘ └─────────────┘ └─────────────┘ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ ┌─────────────┐ ┌─────────────┐ ┌─────────────┐ ┌─────────────┐ │ │ │ │ ┌─────────────┐ ┌─────────────┐ ┌─────────────┐ ┌─────────────┐ │ │ │ │ │ │ │ Core P#4 │ │ Core P#9 │ │ Core P#10 │ │ Core P#16 │ │ │ │ │ │ Core P#9 │ │ Core P#10 │ │ Core P#11 │ │ Core P#16 │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ ┌─────────┐ │ │ ┌─────────┐ │ │ ┌─────────┐ │ │ ┌─────────┐ │ │ │ │ │ │ ┌─────────┐ │ │ ┌─────────┐ │ │ ┌─────────┐ │ │ ┌─────────┐ │ │ │ │ │ │ │ │ │ PU P#4 │ │ │ │ PU P#5 │ │ │ │ PU P#6 │ │ │ │ PU P#7 │ │ │ │ │ │ │ │ PU P#16 │ │ │ │ PU P#17 │ │ │ │ PU P#18 │ │ │ │ PU P#19 │ │ │ │ │ │ │ │ │ └─────────┘ │ │ └─────────┘ │ │ └─────────┘ │ │ └─────────┘ │ │ │ │ │ │ └─────────┘ │ │ └─────────┘ │ │ └─────────┘ │ │ └─────────┘ │ │ │ │ │ │ │ │ ┌─────────┐ │ │ ┌─────────┐ │ │ ┌─────────┐ │ │ ┌─────────┐ │ │ │ │ │ │ ┌─────────┐ │ │ ┌─────────┐ │ │ ┌─────────┐ │ │ ┌─────────┐ │ │ │ │ │ │ │ │ │ PU P#28 │ │ │ │ PU P#29 │ │ │ │ PU P#30 │ │ │ │ PU P#31 │ │ │ │ │ │ │ │ PU P#40 │ │ │ │ PU P#41 │ │ │ │ PU P#42 │ │ │ │ PU P#43 │ │ │ │ │ │ │ │ │ └─────────┘ │ │ └─────────┘ │ │ └─────────┘ │ │ └─────────┘ │ │ │ │ │ │ └─────────┘ │ │ └─────────┘ │ │ └─────────┘ │ │ └─────────┘ │ │ │ │ │ │ │ └─────────────┘ └─────────────┘ └─────────────┘ └─────────────┘ │ │ │ │ └─────────────┘ └─────────────┘ └─────────────┘ └─────────────┘ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ ┌─────────────┐ ┌─────────────┐ ┌─────────────┐ ┌─────────────┐ │ │ │ │ ┌─────────────┐ ┌─────────────┐ ┌─────────────┐ ┌─────────────┐ │ │ │ │ │ │ │ Core P#18 │ │ Core P#19 │ │ Core P#25 │ │ Core P#26 │ │ │ │ │ │ Core P#17 │ │ Core P#18 │ │ Core P#24 │ │ Core P#26 │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ ┌─────────┐ │ │ ┌─────────┐ │ │ ┌─────────┐ │ │ ┌─────────┐ │ │ │ │ │ │ ┌─────────┐ │ │ ┌─────────┐ │ │ ┌─────────┐ │ │ ┌─────────┐ │ │ │ │ │ │ │ │ │ PU P#8 │ │ │ │ PU P#9 │ │ │ │ PU P#10 │ │ │ │ PU P#11 │ │ │ │ │ │ │ │ PU P#20 │ │ │ │ PU P#21 │ │ │ │ PU P#22 │ │ │ │ PU P#23 │ │ │ │ │ │ │ │ │ └─────────┘ │ │ └─────────┘ │ │ └─────────┘ │ │ └─────────┘ │ │ │ │ │ │ └─────────┘ │ │ └─────────┘ │ │ └─────────┘ │ │ └─────────┘ │ │ │ │ │ │ │ │ ┌─────────┐ │ │ ┌─────────┐ │ │ ┌─────────┐ │ │ ┌─────────┐ │ │ │ │ │ │ ┌─────────┐ │ │ ┌─────────┐ │ │ ┌─────────┐ │ │ ┌─────────┐ │ │ │ │ │ │ │ │ │ PU P#32 │ │ │ │ PU P#33 │ │ │ │ PU P#34 │ │ │ │ PU P#35 │ │ │ │ │ │ │ │ PU P#44 │ │ │ │ PU P#45 │ │ │ │ PU P#46 │ │ │ │ PU P#47 │ │ │ │ │ │ │ │ │ └─────────┘ │ │ └─────────┘ │ │ └─────────┘ │ │ └─────────┘ │ │ │ │ │ │ └─────────┘ │ │ └─────────┘ │ │ └─────────┘ │ │ └─────────┘ │ │ │ │ │ │ │ └─────────────┘ └─────────────┘ └─────────────┘ └─────────────┘ │ │ │ │ └─────────────┘ └─────────────┘ └─────────────┘ └─────────────┘ │ │ │ │ │ └────────────────────────────────────────────────────────────────────┘ │ │ └────────────────────────────────────────────────────────────────────┘ │ │ │ └────────────────────────────────────────────────────────────────────────┘ └────────────────────────────────────────────────────────────────────────┘ │ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ ┌────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐ │ Host: dp-cn50 │ │ │ │ Indexes: physical │ │ │ │ Date: Thu 21 Nov 2019 15:22:31 CET │ └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘ }}} The `PU P#X` are the Processing Units numbers exposed by the OS. To exploit SMT, simply run a job using a number of tasks*threads_per_task higher than the number of physical cores available on a node. Please refer to the [https://apps.fz-juelich.de/jsc/hps/jureca/smt.html relevant page] of the JURECA documentation for more information on how to use SMT on the DEEP nodes. **Attention**: currently the only way to assign Slurm tasks to hardware threads belonging to the same hardware core is to use the `--cpu-bind` option of psslurm using `mask_cpu` to provide affinity masks for each task. For example: {{{#!sh [deamicis1@deepv hybridhello]$ OMP_NUM_THREADS=2 OMP_PROC_BIND=close OMP_PLACES=threads srun -N 1 -n 2 -p dp-dam --cpu-bind=mask_cpu:$(printf '%x' "$((2#1000000000000000000000000000000000000000000000001))"),$(printf '%x' "$((2#10000000000000000000000000000000000000000000000010))") ./HybridHello | sort -k9n -k11n Hello from node dp-dam01, core 0; AKA rank 0, thread 0 Hello from node dp-dam01, core 48; AKA rank 0, thread 1 Hello from node dp-dam01, core 1; AKA rank 1, thread 0 Hello from node dp-dam01, core 49; AKA rank 1, thread 1 }}} This can be cumbersome for jobs using a large number of tasks per node. In such cases, a tool like [https://www.open-mpi.org/projects/hwloc/ hwloc] (currently available on the compute nodes, but not on the login node!) can be used to calculate the affinity masks to be passed to psslurm. {{{#!comment == pbs/slurm dictionary == || '''PBS command''' || '''closest slurm equivalent''' || || qsub || sbatch || || qsub -I || salloc + srun --pty bash -i || || qsub into an existing reservation || ... --reservation= ... || || pbsnodes || scontrol show node || || pbsnodes (-ln) || sinfo (-R) or sinfo -Rl -h -o "%n %12U %19H %6t %E" | sort -u || || pbsnodes -c -N n || scontrol update NodeName= State=RESUME || || pbsnodes -o || scontrol update NodeName= State=DRAIN reason="some comment here" || || pbstop || smap || || qstat || squeue || || checkjob || scontrol show job || || checkjob -v || scontrol show -d job || || showres || scontrol show res || || setres || scontrol create reservation [ReservationName= ] user=partec Nodes=j3c![053-056] StartTime=now duration=Unlimited Flags=IGNORE_JOBS|| || setres -u ALL || scontrol create reservation ReservationName=\ user=\ Nodes=ALL startTime=now duration=unlimited FLAGS=maint,ignore_jobs || || releaseres || scontrol delete ReservationName= || }}}